Instruction Manual
Digital Kitchen Scale
models 00943 / 00944 / 00945
CONTENTS
Package Contents .................. 2
Customer Support.................. 2
Features & Benefits................. 3
Setup .................................... 4
Install or Replace Battery........ 4
Set the Measurement Units ..... 4
Using the Scale...................... 5
Troubleshooting ..................... 7
Care & Maintenance.............. 7
Specifications......................... 7
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Features & Benefits
1 2
3
FRONT
FRONT
1. Weighing Area
2. Display
3. MODE Button
4. ZERO & ON/OFF
Button
5
6
BACK
4
5. Integrated Hang
Hole
BACK
for wall mount storage.
6. Battery
Compartment
7
7. Unit Conversion
Button
WEIGHT MODE
WEIGHT MODE
8
9
10
11
8. Tare Indicator
9. Minus Indicator
Indicates weight of
item(s) removed from
the scale.
10. Current Weight
11. Weight Units
12. Zero Indicator
13. Weight Mode
Indicator
12
13
14
15
14. Milk Mode
Indicator
15. Water Mode
Indicator
3
SETUP
Install or Replace Battery
1. Remove the battery compartment cover.
2. Insert 1 x 3V CR2032 lithium battery into the battery compartment, as
shown. Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.
Remove
Battery Cover
1
CR2032
+
Install Battery
2
1 x 3V CR2032
lithium battery
Set the Measurement Units
When you are in Weight Mode, press the Unit Conversion button, located on
the back of the scale, to toggle between kg/g and lb/oz.
4
OPERATION
Using the Scale
Measure Weight
The scale's default mode is set to weigh solid items. Volume Mode, used
for weighing liquids, allows you to choose between WATER or MILK modes
because milk is denser than water.
Weight Mode
1.Place the scale on a flat, stable surface.
2.Press ZERO/ON/OFF button to turn scale on.
3.Wait for the display to show 0 weight.
4.Make sure scale is in Weight Mode. If not, use MODE button to select
Weight Mode. (show MODE button and MODE indicators)
5.Place item(s) to be weighed onto the surface of the scale.
6.Weight will be shown on the display.
Volume Mode
1.Place the scale on a flat, stable surface.
2.Press ZERO/ON/OFF button to turn scale on.
3.Wait for the display to show 0 weight, then press the MODE button until
MODE indicator is on for Milk or Water.
4.Place a container on the scale.
5.Press ZERO/ON/OFF button to reset display to 0.
6.Pour liquid into the container. Display will show liquid volume.
7. To view the weight of the liquid, press MODE button until Weight Mode
indicator is on.
Zero & Tare Functions
To measure items as they are added, use the Zero and Tare Functions. If the
weight of the items being measured is below 4% of the scale’s capacity (less
than 0.2kg/0.4lb), the Zero function is used. If the weight of the items exceeds
4% of the scale’s capacity, the Tare function is used.
1.Place the first item(s) within the center of the Weighing Area of the scale
to take a measurement.
2.Without removing the item(s), press the ZERO/ON/OFF button to reset
the display to 0.
3.Depending on the weight of the item(s), you will see the Zero indicator
"O" or the Tare indicator "T" on the display.
4.With the first item(s) still in place, add the next item to the surface of the
scale. The display will now show the weight of that item.
5
5.Press ZERO/MODE to see the combined weight of the two items.
6.Press ZERO/MODE again to reset the display to 0.
7. Repeat these steps until all items have been added.
Note: Adhere to the maximum weight capacity of the scale.
Minus Function
If you add multiple items to the scale at one time to get a total weight, you can
identify the value of a single item or ingredient by using the Minus Function:
1.Add item(s) to the scale; display shows total weight.
2.Press ZERO/ON/OFF to reset display to 0.
3.Remove an item.
4.Display shows the weight of the removed item with the Minus Function
indicator (negative value is shown on the display).
5.Remove both items to see the combined weight of the two items.
6.Repeat steps as needed.
Warning Messages
Replace battery (see page 4).
Maximum capacity has been exceeded. Remove
items to prevent damage.
Power the Unit ON/OFF
The scale will automatically power off when the display shows 0 or the same
weight for 2 minutes. Press ZERO/ON/OFF to power the scale on. To power
off manually, press ZERO/ON/OFF when the LCD is showing 0, or press and
hold ZERO/ON/OFF for 3 seconds if a weight is shown on the display.
Storage
The scale can stored on a level surface or can be hung by using the integrated
hang hole.
6
Troubleshooting
Problem
Possible Solution
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
If your AcuRite product does not operate properly after trying
(877) 221-1252 for assistance.
Care & Maintenance
Store in a dry location at room temperature. Clean with a soft, damp cloth.
DO NOT immerse in water or use caustic cleaners or abrasives. All parts
should be wiped clean immediately after direct contact with foods. Avoid
contact with acids and citrus juices. Use the scale on a hard, flat surface. DO
NOT strike, shake or drop the scale. Scale is not designed for commercial use.
Specifications
MAX WEIGHT CAPACITY
5kg / 11lbs
POWER
3V CR2032 lithium battery
7
Weather
Stations
Temperature
& Humidity
Weather
Alert Radio
Kitchen
Thermometers
& Timers
Clocks
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
Plan your day with confidence™.
www.AcuRite.com
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark
of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and
copyrights are the property of their respective owners. AcuRite uses patented
Printed in China
00943 INST 061813
|