Return to Index
A D D V E R S A T I L I T Y W I T H :
™
48-Inch Edge™ Xtra Deck
54-Inch Edge Xtra Deck
Mulching Attachments
7-Bushel 2-Bag Power Flow
Material-Collection System
14-Bushel 3-Bag Power Flow
Material Collection System
19-Bushel MC519 Cart and Power Flow
Material Collection System
48-Inch Front Blade
SELECT SERIES X500, X520, X534 (4WS),
AND X540 MULTI-TERRAIN™ TRACTORS
Remote Manual Angling Kit for Front Blade
40-Inch Tractor Shovel
44- or 47-Inch Snow Blower
30-Inch Mechanical Rotary Tiller
(X500, X520, X540)
42-Inch Hydraulic Tiller (X540)
Sprayers (15-, 25-, and 40-Gallon Tow-Behind)
Tow-Behind Thatcherator
42-Inch Lawn Sweeper
80-, 110-, 125-, 175-Pound Pull-Type
Spin Spreaders
X500 Tractor shown
40-Inch Aerator Spreader
40-Inch Spike Aerator
40-Inch and 48-Inch Plug Aerators
36-Inch Lawn Roller
46- and 54-inch Front Thatchers
Weights
Wheel Covers
Utility Carts
Integral Hitch
Front Bumper
Brush Guard
Tire Chains
X540 Tractor shown
Single or Double Bucket Holders
F E A T U R E S
• Four models make up John Deere’s line of Select
Series X500 Tractors. These tractors provide
the customer with excellent stability, traction
and versatility.
• All models use John Deere’s exclusive Twin
Touch automatic drive system. Dual foot pedals
allow the operator to easily select tractor speed
and direction while keeping both hands on the
steering wheel for maximum productivity.
• Comfortable, 15- or 16-inch seats provide a
cushioned ride and good support for the
operator. The open back design allows air to
circulate to keep the operator’s back cool.
• John Deere iTorque™ Power Systems with
25-horsepower* V-twin air-cooled engines and
26-horsepower* liquid-cooled engines are used
in the X500 Multi-Terrain Tractors.
• The seat can be easily adjusted fore and aft
7 inches. The unique seat suspension system
uses two adjustable coil springs to give the
operator a smooth, stable ride.
• Cruise control is standard on all models.
• Welded frame is made of 3-mm thick steel for
excellent strength and reliability. A heavy-duty
cast-iron front axle pivots at the center and
oscillates to keep all wheels on the ground when
traveling over uneven terrain.
• The iTorque Power System includes a
combination of engine features and exclusive
hood design that provide more lugging ability,
even cooling, and durability.
• On the X500 and X520, a lift-assist spring is coupled
with a foot-pedal lift system to make raising the
mower and other implements both convenient and
easy. The spring can be adjusted to accommodate
different implements.
• Sector-and-pinion steering (X500, X520) or
convenient power steering with tilt steering
wheel (X534, X540) is standard.
• Engines feature premium components for
excellent reliability and long engine life. Included
are cast-iron cylinder liners, overhead valves,
full-pressure lubrication with replaceable oil
filter, and dual-stage air filter.
• On the X534 and X540, hydraulic power lift provides
an even higher level of convenience.
• Metal bushings are used at the steering spindles
to provide easy steering and long life. A grease
cavity between the bushings provides continuous
lubrication during operation.
• The lift system allows mower cutting heights
from 1 to 4 inches.
• Fully regulated 15 amp electrical system provides
quick, reliable starts. It also powers the standard
headlights and electric PTO clutch.
• X500 Series Tractors come with a 48- or 54-inch
Edge Xtra mower deck. Features include ¼-inch
cut-height increments, 4-point mounting, and
wider wheels. These mowers offer excellent
cutting performance and easy convertibility.
• A tight turning radius provides superb handling.
The X534 has 4-wheel steering that gives this
model even tighter turning for superior
maneuverability and easier trimming around
trees and bushes.
• Hydrostatic transaxle is sealed in one housing for
efficient operation. A replaceable filter keeps the
oil clean for long life. Full-length axle housings
are designed to handle heavy loads.
• Mower decks feature Quik-Tatch™ mounting,
dual-belt drive, wash port, greaseable spindles,
powder paint, and many other high-quality
features to ensure long, trouble-free use.
• Operator controls are color-coded and identified
with English words for easy identification and
logically placed for easy use.
• Heavy-Duty CargO™ Mounts make installation of
rear-mounted equipment like the 7- and 14-bushel
material collection hoppers easy.
* Engine horsepower is provided by the engine manufacturer for comparison purposes. Actual operating horsepower will be less.
C&CE PURCHASING GUIDE 2008
166
|